KleenRunner
Click on the image above for a larger version.

 

KleenRunner
Click on the image above for a larger version.


  • KleenRunner is made of the same thin, tear resistant and skid resistant material as KleenWrap. KleenRunner is printed with lines running the entire length of the roll to make it very convenient to cut it to the exact width to protect hallways or other areas where a runner is needed.

  • KleenRunner is available both Breathable Micro-Perforated and Non-Perforated depending on the floors you want to protect. It can be used to protect finished and unfinished hardwoods, stone, tile, carpet, and concrete.

  • KleenRunner has no adhesive on it whatsoever. Cut to the length and width needed, it will lay flat and can be taped occasionally along the edges and along the ends to hold it in place and avoid a tripping hazard. Use whatever tape or other means you are comfortable with to secure it to floors other than OSB or plywood subfloors. Staples can be used to secure KleenRunner to OSB or plywood. We recommend KleenWrap Tape only be used for securing KleenRunner to smooth concrete surfaces or for the overlapped edge with another strip of KleenRunner or KleenWrap.

  • KleenRunner is available in 40" x 250' rolls and 60" x 250' rolls. The 40" roll is conveniently marked with lines for cutting easily to exact widths from 30" to 39". The 60" roll is marked for cutting easily to exact widths from 41" to 59".

  • At the end of the day, the week or the job, if the KleenRunner is not damaged or too dirty to reuse, simply fold it over on itself bringing the dirty sides face to face and roll it up to use another day. And remember, like KleenWrap, it is recyclable.


 
©2006-2012 All rights reserved.  Patent Pending.
Privacy Policy